Disintegrators

Filters
Disintegrator mill “DIPS-200” (industrial fine grinding cage mill machine)

Disintegrator mill “DIPS-200” (industrial fine grinding cage mill machine)

259 000 ₴
Disintegrator mill “DIPS-300” (industrial fine grinding cage mill machine)

Disintegrator mill “DIPS-300” (industrial fine grinding cage mill machine)

269 000 ₴
Disintegrator mill “DIPS-400” (industrial fine grinding cage mill machine)

Disintegrator mill “DIPS-400” (industrial fine grinding cage mill machine)

285 000 ₴
Single-drive disintegrator working module (industrial cage mill grinding unit)

Single-drive disintegrator working module (industrial cage mill grinding unit)

189 000 ₴
Dual-drive disintegrator working module (industrial cage mill grinding unit)

Dual-drive disintegrator working module (industrial cage mill grinding unit)

219 000 ₴

Disintegrators are industrial machines for crushing, breaking down and separating materials into fine fractions by means of mechanical and impact action. Particles of raw material are shattered as they collide with one another and with the hard working elements of the machine, which produces an ultra-fine grind at the output. This category presents DIPS series disintegrators — powerful, high-capacity industrial fine grinding mills — as well as working modules for building your own grinding lines.

How a disintegrator works

Impact grinding is the basis of operation. The material is not cut or squeezed, as in many other types of grinders; instead, it is broken up in the flow by short, intense impacts. That is why disintegrators are used where a high degree of product dispersion is required: the finer and more uniform the fraction, the easier it is to mix, dose, pelletize or use the raw material as an additive in a ready-made blend.

Where disintegrators are used

The impact principle makes it possible to process materials of different origin, both natural and synthetic. The main areas include:

The specific capabilities of the equipment for your material — its hardness, moisture content and required fineness of grind — should be clarified with a manager before purchase.

DIPS series: choose equipment for your volumes

The DIPS-200, DIPS-300 and DIPS-400 range is built on a principle of gradually increasing capacity. This makes it possible to choose a machine for a small workshop, a mid-sized enterprise or an established high-volume operation. The units are mounted on a mobile frame with a feed hopper and a cyclone for collecting the finished product, so they are easy to position on site and to move when necessary.

Disintegrator working modules

Working modules with one or two drives are available separately. This is the core unit of an industrial fine grinding mill, used when you need to build grinding into your own production line, upgrade an existing installation or assemble equipment for a non-standard task. The choice between the single-drive and double-drive versions depends on your raw material, operating mode and power requirements — it is best to rely on specialist advice here.

Advantages of DIPS disintegrators

How to choose a disintegrator

Before buying, define the key parameters — this will help you avoid mistakes in configuration:

A disintegrator in a production line

Fine grinding is usually one stage of the process. Coarse raw material can be reduced beforehand in hammer mills. To collect dust in the work area, use dust extraction units.

Operating rules

For stable operation, feed the material evenly, prevent foreign metal and stone objects from getting in, follow the start-up and shutdown procedure, and regularly inspect the working units, drives and fasteners. All installation and maintenance requirements are given in the manual for the specific model.

Not sure which will suit your material better: a complete DIPS unit or a working module? Contact our managers — they will help you decide on the configuration and answer your technical questions.