The Working module of the BIZON-150 jaw crusher is designed for primary and secondary crushing of minerals and construction waste with a compressive strength of up to 320 MPa. The feed opening is 150×200 mm. The module can be installed in the buyer’s own structure; the drive, petrol or electric, is chosen by the buyer.
Purpose and Application
The crusher is used for primary and secondary crushing of minerals and construction waste: stone, concrete, brick and artificial materials. It is used in construction, construction-waste recycling, mining, the production of building materials and the chemical industry. The listed materials include ore, coal, coke, granite, ceramics, quartz, concrete and crushed stone. It is not intended for viscoelastic materials such as wood, polymers and some metal alloys. After crushing, classifying equipment is needed to separate the finished product into fractions.
Operating Principle
One jaw plate of the crusher is fixed and the other is movable. The drive turns an eccentric shaft, which moves the movable jaw up and down. On the downstroke the gap between the jaws narrows and the material is broken by compression and shear. On the upstroke the gap widens, and springs pull the movable jaw back so the crushed particles leave the working zone. The crushing chamber is wedge-shaped, so under gravity the material moves from the wide feed opening to the narrower discharge slot. The gap between the jaws is adjusted mechanically. The drive is belt-type: if the chamber jams, the belts slip on the pulleys and do not damage the motor.
Technical Specifications
- Drive: Chosen by the buyer: petrol 7 hp or electric 4/5.5 kW
- Feed opening: 150×200 mm
- Jaw plates: 150×400 mm, manganese steel 110G13L
- Output size: 5–50 mm
- Capacity: 1.5 t/h at a 10 mm fraction; 7.5 t/h at a 50 mm fraction
- Reduction ratio: Typically 2–3
- Material moisture: Up to 6–8%
- Compressive strength of the material: Up to 320 MPa
- Module dimensions (L×W×H): 550×460×575 mm
Features and Advantages
- Design: Simple, easy to maintain
- Jaw plates: Can be flipped or swapped; the movable plate usually wears faster
- Side plates: Replaceable
- Inertia: An oversized pulley and balancer
- Operator protection: A guard and hopper made of thick sheet with rubber inserts
- Modular design: Can be mounted on a vehicle for work without mains power
- Noise and dust: Low
Equipment
- Working module of the BIZON-150 jaw crusher
- Receiving hopper
- Optional: spare BIZON-150 jaw plate